How to Polish Silver? What are the Silver Polishing Methods?
Jewelry has become indispensable for both daily and stylish combinations. Today, most people reflect their styles by completing their combinations with accessories. As the frequency of use of jewelry increases, the frequency of cleaning and polishing should also increase. From necklaces to earrings, from rings to bracelets; even all darkened, dirty, oiled silver can be easily cleaned at home; It can regain its shine. Thus, precious jewelry can continue to maintain its value.
What are the Silver Polishing Methods?
The most important problem encountered in silver jewelry; Jewelry often darkens and loses its shine. There are many practical ways to eliminate this problem. Thanks to the mixtures created with the ingredients found in every home, silver jewelry can be polished easily and quickly.
Silver Polishing with Toothpaste
A small amount of toothpaste is applied to the toothbrush, cotton or napkin. The entire jewelry is rubbed lightly and then left in a bowl of water for half an hour. Finally, the jewelry is rinsed and dried with a cloth.
Silver Polishing with Vinegar Water and Carbonate
Known for its cleansing properties, vinegar is also very effective in cleaning and polishing silver. Put a small amount of water in a bowl and add 2 tablespoons of vinegar and baking soda. Silver jewelry is kept in this bowl for half an hour. Afterwards, the jewelry is rinsed and dried with a cloth.
Polishing Silver with Salt and Lemon
The juice of one lemon is squeezed and mixed with 1 tablespoon of salt and water. After mixing well, silver jewelry is placed in water and left for half an hour. When the time is up, the jewelry is rinsed and dried with a cloth.
Polishing Silver with Dishwashing Liquid
A coffee pot is filled with water and 2-3 drops of dish soap are added. Silver jewelry is placed in the coffee pot and boiled over low heat for 10-15 minutes. The accessories are then rinsed and dried with a cloth.
Polishing Silver with Soap
Liquid soap is sprayed on the silver jewelry that is desired to be polished and rubbed lightly with a soft brush. When it is thought that sufficient brightness has been reached, it is rinsed with water and dried with a cloth.
Polishing Silver with Ammonia
Add 1 glass of warm water and half a glass of ammonia to a bowl. Silver jewelry is placed in this mixture and left for 10 minutes. Then the jewelry is rinsed and wiped dry with a cloth.
What are the Points to Consider While Polishing Silver?
There are some points to be considered in the silver polishing process, which can be easily done in the home environment and with the contents at home. When applying silver polishing methods, hands should not be affected by chemical ingredients. For this reason, gloves should be worn while polishing silver. Also, some of the mixtures mentioned can release gas into the air.
Therefore, the environment should be well ventilated or a mask should be worn during the silver polishing process. In order not to damage silver jewelry, to avoid discoloration and to obtain good results, the instructions for mixing the ingredients mentioned in the methods should be followed.